-
Number of Woofers:1
-
Woofer in Inches:15
-
Performance According To Manufacturer:1600W
-
Power Rms:800W
-
Operating Mode:Class D
-
Housing Material:plywood
-
Bluetooth:Yes
-
Dsp:Yes
With the MAUI 44 G2 SUB W subwoofer, you extend the cardioid characteristics of our professional column speaker series into the bass range.
What does that mean?Position the SUB, facing rearward, next to your MAUI® 44 G2 (W), press the Cardioid button, and experience controlled low-end at the rear while maintaining the forward punch. The low frequencies at the rear of the system are attenuated by -15 dB.
For additional bass, hold the SUB facing the same direction as your MAUI® 44 G2 (W) without pressing the Cardioid button.
Setting up the SUB in combination with your MAUI® 44 G2 (W) system is quick and easy. Thanks to automatic setup detection, the SUB immediately switches to FOLLOWER mode as long as no column is attached. The protective cover and rolling base are also recommended to facilitate transport and keep the SUB free from touring damage for as long as possible. The MAUI® 44 G2 SUB W features the same design as the MAUI® 44 G2 (W) subwoofer and is the perfect complement to take control of your low end.
| Produktart | PA Komplettsystem Zubehör |
| Typ | Aktiv |
| Größe Tieftöner | 15 " |
| Größe Tieftöner | 381 mm |
| Magnet Tieftöner | Neodym |
| Marke Tieftöner | Custom Made |
| Schwingspule Tieftöner | 4 " |
| Schwingspule Tieftöner (mm) | 101 mm |
| Verstärker | Class D |
| Leistung (RMS) | 800 W |
| Leistung (Peak) | 1600 W |
| Max. SPL (Peak) | 126 dB |
| Schutzschaltungen | Gleichstrom |
| Schutzschaltungen | Konvektion |
| Schutzschaltungen | Kurzschluss |
| Schutzschaltungen | Limiter |
| Schutzschaltungen | Überhitzung |
| Bedienelemente | Bluetooth HOLD TO LINK-Taste |
| Bedienelemente | Bluetooth STEREO LINK-Taste |
| Bedienelemente | Cardioid On/Off |
| Bedienelemente | Main Level |
| Bedienelemente | Power On/Off |
| Bedienelemente | Sub Level |
| Anzeigeelemente | Bluetooth |
| Anzeigeelemente | Bluetooth STEREO LINK |
| Anzeigeelemente | Cardioid On/Off |
| Anzeigeelemente | Follower Mode |
| Anzeigeelemente | Limit |
| Anzeigeelemente | Power |
| Anzeigeelemente | Protect (Schutzschaltung aktiv) |
| Anzeigeelemente | Signal |
| Line-Eingänge | 2 |
| Line-Eingangsanschlüsse | 2 x XLR |
| Line-Ausgänge | 2 |
| Line-Ausgangsanschlüsse | 2 x XLR |
| Lautsprecherausgänge | 1 |
| Lautsprecherausgangsanschlüsse | Custom made multipin |
| Stromversorgung | 100 - 120V / 50 - 60Hz oder 200 - 240 V / 50 - 60Hz (automatische Umrechnung) |
| Stromversorgung | Schaltnetzteil |
| Betriebstemperatur | 0 - 40 °C |
| Relative Luftfeuchtigkeit | <80% (nicht kondensierend) |
| Gehäusematerial | 18 mm Birkensperrholz |
| Gehäuseoberfläche | Polyurea |
| Gehäusebauart | Bassreflex |
| Bluetooth-Standard | A2DP |
| Bluetooth-Audio-Decoder | AAC |
| Bluetooth-Audio-Decoder | aptX |
| Bluetooth-Audio-Decoder | SBC |
| Farbe | Weiß |
| Breite | 434 mm |
| Höhe | 634 mm |
| Tiefe | 637 mm |
| Gewicht | 36,4 kg |
DSP Eigenschaften
| Bit - Tiefe AD / DA Wandler | 24 Bit |
| Sampling-Frequenz | 48 kHz |
| Geräuschspannungsabstand | 106 dB |
Adam Hall GmbH, Adam-Hall-Str. 1, 61267 Neu-Anspach, Hessen, Deutschland, info@adamhall.com, https://www.ld-systems.com